Overview

300Mbps Wireless N Access Point

The netis 300Mbps Wireless N Access Point WF2220 provides long range, high performance wireless Internet access over large areas. It provides you multiple wireless modes including AP, Repeater, WDS, Multi-SSID, for flexible wireless network setup and deployment. Also, with the Turbo button, you may easily control the transmission power. Under the high power mode, you will enjoy much better network experience in large homes, multi-floor offices or warehouses.

Features
  • Incredible wireless high speed up to 300Mbps
  • High transmission power to boost wireless signal for further distance
  • Enhanced signal strength to penetrate walls and eliminate Wi-Fi dead zones
  • High gain 5dBi detachable antenna design allowing for flexible antenna upgrade
  • Multiple wireless modes- AP, Repeater, WDS, Client,Multi-SSID(VLAN)
  • Multi-SSID providing up to 3separate networks for guests and friends
  • Wireless schedule function helping you to control your wireless online time reasonably
  • Easy wireless security setup at a push of the WPS button
  • Turbo button to improve the signal strength in a snap
  • Passive PoE(Power over Ethernet) for flexible deployment
  • Quick setup, with built-in web management page
Specification
Wireless
Standards IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Signal Rate Up to 300Mbps
Frequency Range 2.4-2.4835GHz
Transmit Power 23dBm(MAX)
Data Transfer Rates 802.11n:
40MHz(300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps)
20MHz (144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps) (Auto-Sense)
801.11g:
(54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps)
802.11b:
(11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps)
Wireless Modes AP, Repeater,WDS, Multi-SSID(VLAN)
Wireless Security WEP (64/128bit), WPA-PSK, WPA2-PSK,
WPA-PSK/WPA2-PSK mixed mode,
SSID Broadcast Enable/Disable
wireless MAC address filtering
Hardware
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Interface 1 * 10/100Mbps Auto MDI/MDIX RJ45 LAN port, Passive PoE Supported
LED Indicators PWR, Turbo, WPS, LAN
(Turbo LED Status: Blue for Normal Power, Red for High Power)
Button Turbo, Default, WPS
Antenna 2* 5dBi Detachable Antenna, SMA Connector
Power Supply DC 12V/1A (Output)
Software
LAN DHCP Client, DHCP Server
Others Time Settings,Firmware Upgrade, Backup & Restore
Others
Certification FCC, CE
Environment Operating Temperature: 0℃~40℃
Storage Temperature: -40℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Environment 1* WF2220
1* 12V/1A Power Adapter
1* PoE Power Injector
1* Ethernet Cable
1* Quick Installation Guide
Application

Copyright © 2017 ssaco Inc. All rights reserved | Designed By: Homay Web